2020 Newest Arix Diamond Segment Uesd On Core Drill Bit For Cutting Reinforced Concrete
Product Description
Product Name | Arix diamond Core Bit Segment for reinforced concrete |
Size | 24*4*10mm ( Specialized in making any sizes of diamond segment, we can make many different kinds of quality and sizes to fit your market and your stone. ) |
Diameter | 102mm core drill bit ( 25-350mm diamond Core Drill Bit Segment can make ) |
Application | Diamond core drill bit segment Used for drilling reinforced concrete, granite etc. |
Cutting Feedback |
The ARIX Segments have a duration of 80 holes with 20CM depth and drill approximately 3 minutes. |
Package | Color box,double blister card,skin packing,white box etc |
Supply ability | 50,000 pcs/month(We accept mixed order) |
Quality | ISO9001&Gold Supplier Factory=Quality Control=Competitive Price=Owntechnology=OEM |
Core bit Diameter(mm) | Seg. Length(mm) | Seg. Thickness(mm) | Seg. Height(mm) |
25/28/32/36/38/ 40/45/51/56 | 16 | 3.5 | 10 |
83/89/96/102/108/116/120/ 127/132/142/152/ 159/162/180/200 | 24 | 4.0 | 10 |
230/250/300/350 | 24 | 4.5 | 10 |
500/600 | 24 | 5.0 | 10 |
Other specifications of diamond core bit segment are available upon request. |
• The material is too hard for the core bit application range: use a specification suitable for the material in question
• The diamond impregnation is blunt: sharpen the tool with a grinding stone or abrasive material
• Speed too high: reduce speed
• Water flow too high: reduce water flow
• Excessive play of the drilling stand guides: set up the drilling stand
correctly, or have it repaired
• Drilling stand not properly anchored: improve anchoring, use suitable dowels
and a thread rod
• Insufficient machine power: check the motor speed and slip-clutch. Use a more
powerful drill
• Drill motor running, but core bit not rotating: low contact pressure so that the slip clutch is not engaging. If the problem reoccurs, have the drill repaired 2.Excessive wear of the diamond segments
• Insufficient flow of water. Drilling sludge sharpens the diamonds and also wears them down: increase the water flow
• Feed / contact pressure too high: reduce feed
• Drilling material is very abrasive: use a harder core bit segment specification
• Excessive motor power: adjust the motor speed to reflect the core bit diameter
• Core drilling system has too much play, causes excessive vibrations: check and correct the settings. Tighten screws, effect repairs as needed
• The drill stand is not properly anchored: improve anchoring, use adjusting screws (make sure they are adjustable). Use the right dowels and threaded rods or the material that you are drilling Contact Us Contact us if you need more details on Arix Segment. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Diamond Segment For Reinforced Concrete、Diamond Segments For Concrete. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Diamond Segment > Diamond segment for core drill